Dongguan Yabo Electrons Co., Ltd.  

Product Name: Servo Tensioner with Motor External Coil Winding Wire Tensioner Model NO.: SET-100-R Size: Can Be Customized According to Customer Wire Diame Function: Stable Tension Model: Set Characteristic: Tension Roller Is Fixed in Front of Trademark: YABO Transport Package: Special Packing Specification: Can be customized according to customer requiremen Origin: China Product Description Servo Tensioner with Motor External Coil Winding Wire TensionerServo Tension Controller Coil Winding Tensioner Applied for Coil Winding MachineServo Tensioner Coil Winding Wire Tensioner/ Bobbin Coiling Winder Tensioner Used on Winding MachineWinding Machine TensionerServo tensionerIf there is need to other specifications and technical requirements of products, can provide the wire diameter range processing customized according to customer.From the traditional passive servo tensioner wire feeding way instead of by the motor wire feeding, may be changed by changing the tension spring tension values;Tension and bring feedback stabilization system, can automatically realize tension stable equilibrium;Tension is not affected by the linear velocity, the line cover, pulleys, and felt the influence of tension stability in particular, can be changed easilyModelAppliedwirediamiter(mm)Tensionscope(g.f)SET-100-Rφ0.01_φ0.121g_100SET-200-Rφ0.02_φ0.172g_200SET-300-Rφ0.03_φ0.225g_300SET-2000-Rφ0.18_φ0.80200g_2000If there is need to other specifications and technical requirements of products, can provide the wire diameter range processing customized according to customer.Precautions:Select the tension bar and tension spring for the tension value.Do not touch the tension bar in the working state; do not touch the tension sensor wheel, so as not to damage the tension sensor, the actual tension of the display accuracy (for LED display models).To prevent the tensioner from falling, and to avoid damage caused by a strong impact.Winding speed should not exceed 5 m / s; as far as possible in the winding machine start to set a certain acceleration time or set a few laps slow start (start speed should not exceed 1 m / s).Enameled wire must be in strict accordance with the instructions on the dotted line path, followed by tension-related components.Enameled wire through the wool felt folder, you should pull the blankets, sandwiched enameled wire, can also be used clean cloth clamped enameled wire and then press the blanket, so to prevent the enameled wire and screw friction can be avoided often change the blankets. Can be felt through the wool felt adjustment knob the safety of the entire folder force, the general adjustment for the enameled wire security tension of about 5%.When the enameled wire is passed through the jumper and threadwheel, it must be checked to see if it hangs on the guide pulleys. Make sure that the guide pulley can rotate normally without jamming.Tension wheel can not have oil, otherwise the impact of normal use, such as sticky oil, cotton can be dipped in anhydrous alcohol, in the tension wheel groove back and forth cleaning O-ring cleaning oil.According to the use of regular cleaning and replacement of tension felt wool felt to ensure the normal work of tension.